HOME > Nd-Fe-B Magnet Sheet

Site Map

to Japanese Page

Inquiey

Nd-Fe-B Magnet Sheet

Nd-Fe-B Magnet Sheet1

Super Rubber Magnet with 4 times more adsorption power than conventional product.
High magnetic force sheet with neodymium of the strong adsorption power, that is 4 times higher in comparison with conventional rubber magnet. The flexibility of the sheet also improves more. With scissors and a cutter, a clipping can be made easily in various form.

    1. Flexible Magnet Sheet of rare earth Nd-Fe-B.
    2. The Sheet surface does not have the oxidation and falling off of magnet material for a multilayered structure body.
    3. In comparison with normal rubber magnet, there is about 4 times adsorption power.
    4. This product is superior to conventional rubber magnet in flexibility, the reconstruction characteristics and can easily clip it out in scissors and cutter.

Nd-Fe-B Magnet Sheet2 Nd-Fe-B Magnet Sheet3 Nd-Fe-B Magnet Sheet4
• NORMAL SHEET SIZE
0.6 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
1.0 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
2.0 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
3.0 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
• THE SHEET WITH ADHESION MATERIAL IS AVAILABLE
♦ MAGNETIC CHARACTERISTIC
  SI group (mT) CGS group (kG)
 Residual magnetic flux density (Multiple poles, 5mm pitch)  518-534  5.2-5.3
 Coercive force (HcB)  332-337  4.2-4.3
 Coercive force (HcJ)  >650  >8.2
 Maximum energy product (BH max)  44-46  5.5-5.8
♦ SURFACE MAGNETIC FLUX DENSITY AND ADSORPTION POWER
Thickness Dimensions Surface magnetic force Adsorption power
 0.6 mmt  200mm-440mm 85-90mT 140g/cm2
 1.0 mmt  200mm-440mm 130-140mT 360g/cm2
 2.0 mmt  200mm-440mm 160-165mT 450g/cm2
 3.0 mmt  200mm-440mm 210-215mT 530g/cm2
♦ PRODUCT PHYSICS CHARACTERISTIC
  Value
 Heat-resistant temperature range ≤100°C
 Flexibility Good
 Strength 3.8
 Growth rate 55
 Hardness 80-85
 Departure from surface rust * Good
 Oiliness-resistant Rust prevention oil Fine
Machine cutting oil Fine
Spindle oil Admittable
• Above data is not a guarantee value.
* Moisture test (60°C x 95% x 500Hr besides an end face)
To page top