Magna Cap Magnet

Round Type ( R Type) | Square Type ( L Type) | Square Type ( L Type with Double Faced Adhesive Tape)

	Round Type (R Type)

Code	OD X HX [ ID ]	T	Holding Force	Remarks
12R	12.3Ø X 3.7	0.5	0.3kgf	Zn plated/ Unichrome treated
B12R	12.3Ø X 3.7	0.5	0.1kgf	Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite
B15R	15Ø X 4	0.8	0.2kgf	Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite
16R	16Ø X 3 (2.7Ø )	0.7	0.5kgf	Zn plated/ Unichrome treated
18R	17.5Ø X 5	0.7	0.8 kgf	Zn plated/ Unichrome treated
B18R	17.5Ø X 5	0.8	0.4 kgf	Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite
20R	19.8Ø X 4 (3.5Ø )	0.8	1.5 kgf	Zn plated/ Unichrome treated
23R	22.8Ø X 5.2	1.0	2.2 kgf	Zn plated/ Unichrome treated
23RH	22.8Ø X 5 (5Ø )	0.9	2.2 kgf	Zn plated/ Unichrome treated
24R	23.5Ø X 5	0.8	2.4 kgf	Zn plated/ Unichrome treated
B24R	23.5Ø X 5	0.8	0.5 kgf	Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite
25R	25.5Ø X 5 (3.2Ø )	0.8	1.8 kgf	Zinc black coating
28R	28.8Ø X 5.6	1.0	3.5 kgf	Zn plated/ Unichrome treated
B28R	28.8Ø X 5.6	1.0	1.5 kgf	Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite
32R	31.5Ø X 4.7 (4.3Ø )	0.8	4.0 kgf	Zn plated/ Unichrome treated
B32R	31.5Ø X 4.7	0.8	1.6 kgf	Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite
36R	36Ø X 7.5	1.6	6.0 kgf	Zn plated/ Unichrome treated
36RH	36Ø X 7.5 (4.2Ø )	1.6	6.0 kgf	Zn plated/ Unichrome treated
44R	44Ø X 8 (M4 )	1.6	11.0 kgf	Zn plated/ Unichrome treated
46RH	46Ø X 4.7 (5Ø )	1.2	15.0 kgf	Zn plated/ Unichrome treated
B44R	44Ø X 8 (M4 )	1.6	2.5 kgf	Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite
50R	50Ø X 8.5 (5Ø )	1.6	14.0 kgf	Zn plated/ Unichrome treated
52R	51.5Ø X 7.9 (4.9Ø )	1.6	15.0 kgf	CR plated
66R	66Ø X 9.8 (9.5Ø )	2.0	25.0 kgf	CR plated
66RS	66Ø X 9.8 (6.2Ø )	2.0	25.0 kgf	CR plated
77R	76.5Ø X 11 (6.2Ø )	2.0	35.0 kgf	CR plated
78R	78Ø X 11 (8ØÅ\3Ø )	2.0	35.0 kgf	Zn plated/ Unichrome treated
80R	80Ø X 12.7 (10.2Ø )	2.0	40.0 kgf	CR plated
80RS	80Ø X 10.5 (7.2Ø )	2.0	40.0 kgf	CR plated
98R	98Ø X 12.5 (9.5Ø )	2.0	50.0 kgf	CR plated
125R	124.5Ø X 12.4 (12.7Ø )	2.0	100.0 kgf	CR plated

• Cap Material, SPCC
• The magnetic absorption is a value for reference ( Measured by Imada Digital Force Gage)

To page top↑

	Square Type ( L Type)

Code	L X W X H	T	Holding Force	Remarks
20L	20 X 8.4 X 4.2	0.6	0.8kgf	Zn plated/ Unichrome treated
24L	24 X 12 X 5.1	0.8	2.0kgf	Zn plated/ Unichrome treated
25LH	25.5 X 23.5 X 6.5 (6Ø )	1.4	3.0kgf	Zn plated/ Unichrome treated
25L	25.5 X 23.5 X 6.5	1.4	3.5kgf	Zn plated/ Unichrome treated
26L	25.5 X 11 X 6.5	1.0	2.0kgf	Zn plated/ Unichrome treated
32LH	32 X 15.7 X 7.8(3.2Ø )	1.5	1.0kgf	Zinc coating
36L	36 X 21X 6	1.0	3.5kgf	Zn plated/ Unichrome treated
43LH	43 X 30.2 X 7(6Ø )	1.6	8.5kgf	Zn plated/ Unichrome treated
43L	42.8 X 28 X 6.5	1.2	8.0kgf	Zinc coating
45L	45 X 30 X 7	1.6	13.0kgf	Zn plated/ Unichrome treated
49L	49 X 41 X 13	2.0	20.0 kgf	Zn plated/ Unichrome treated
49LH	49 X 41 X 12.8(M5 )	2.0	17.0kgf	Zn plated/ Unichrome treated
60L	60 X 23.8 X 6.8	1.4	13.0kgf	Zn plated/ Unicrome treated/ A square hole on each end
79L	79 X 38 X 13	2.0	23.0kgf	Zn plated/ Unicrome treated/ A square hole on each end
90L	90 X 18.8 X 6	1.2	9.0kgf	Zn plated/ Unicrome treated/ A 3.5Ø hole on each side

• Cap Material, SPCC
• The magnetic absorption is a value for reference ( Measured by Imada Digital Force Gage)
• As magnetic flux is concentrated on the tip S of the cap,its adsorbability becomes five to ten times as strong as that of a simple magnet.


60L A square hole on each end		90L A square hole on each end

To page top↑

	Square Type ( L Type with Double Faced Adhesive Tape)

Code	L X W X H	T	Holding Force	Remarks
28LF	28.5 X 15.5 X 4.5	1.2	2.0kgf	Double faced adhesive tape/ Zinc black coating
43.5L	43.5 X 30.1 X 7	1.5	6.0kgf	Double faced adhesive tape/ Protect Film covered/ Zn plated/ Unicrome treated
48L	48 X 45 X 12.5	2.0	18.0kgf	Double faced adhesive tape/ Protect Film covered/ Zn plated/ Unicrome treated
50L	50 X 27 X 12 (5ØX 2 )	1.6	14.0kgf	M4 Counter sunk/ Zn plated
45LP	45 X 30 X 7	1.6	13.0kgf	Double faced adhesive tape/ Protect Film covered/ Zn plated/ Unicrome treated
47LP	46.8 X 30 X 7.7	1.8	13.0kgf	Zn plated/ Unicrome treated/ Protect Film covered/ 2 claws on one side
51LP	51 X 30.4 X 2	1.5	13.0kgf	Zn plated/ Unicrome treated/ Protect Film covered
80L	80 X 25 X 7.1	1.6	17.0kgf	Zinc coating/ Protect Film covered

• Cap Material, SPCC.
• The pitch between two holes of 50L type is 25. The double faced adhensive tape is a VHB tape, producted by Sumitomo 3M.
• The magnetic absorption is a value for reference ( Measured by Imada Digital Force Gage)


28LF Double Faced Adhesive Tape		90L A square hole on each end

To page top↑