Plate Catch
Since a traditional Plate Catch is thick, it had some disadvantages such as it had to be fixed on the main body of a storage case. The newly developed Plate Catch is thin and flat, and can easily be fixed on the lid since a hole for counter sunk head screw is directly bored in the magnet.

[Round Type]
Code OD X H M Holiding Force Remarks
NC-12R
12Ø X 3
3
3.0kgf
Zn plated/Cr treated(RoHS-compliant)
NC-24R
24Ø X 4
5
6.0kgf
Ni plated
NC-35R
35Ø X 5
5
12.0kgf
Ni plated
[Square Type]
Code L X W X H M Holiding Force Remarks
NC-20L
20 X 10 X 3
3
2.5kgf
Zn plated/Cr treated(RoHS-compliant)
NC-35L
34.5 X 20 X 5
5
11.0kgf
Ni plated
NC-50L
50 X 10 X 3
3
5.0kgf
Zn plated/Cr treated(RoHS-compliant)
• Adsorbability is based on a backing plate of 1.6t ( Measured by Imada Digital Force Gage) .
• Must be used below 80 °C.
To page top↑
  Plate Catch (Yoke Attached)
A plate magnet with a yoke attached makes adsorbability two or four times as strong as the one without a yoke.

[Round Type]
Code OD X H M T(yoke) Holiding Force Remarks
NCC-12R
15.5Ø X 5
3
1.5
4.0kgf
Zn plated/Cr treated(RoHS-compliant)
NCC-29R
29Ø X 6.6
5
2.1
24.0kgf
Ni plated
NCC-40R
40Ø X 7.6
5
2.1
40.0kgf
Ni plated
[Square Type]
Code L X W X H M T(yoke) Holiding Force Remarks
NCC-20L
20 X 13.5 X 5
3
1.5
7.5kgf
Zn plated/Cr treated(RoHS-compliant)
NCC-35L
35 X 24.5 X 7.5
5
2.0
30.0kgf
Ni plated
NCC-50L
50 X 13.5 X 5
3
1.5
20.0kgf
Zn plated/Cr treated(RoHS-compliant)
• Adsorbability is based on a backing plate of 1.6t ( Measured by Imada Digital Force Gage) .
• Must be used below 80 °C.
To page top↑

Copyright 1998-2010 Magna Co., Ltd. Tokyo, Japan. All Rights Reserved