Super magnet sheet | -Magna Tokyo-

Super Rubber Magnet with 4 times more adsorption power than conventional product.



	High magnetic force sheet with neodymium of the strong adsorption power, that is 4 times higher in comparison with conventional rubber magnet. The flexibility of the sheet also improves more. With scissors and a cutter, a clipping can be made easily in various form.
	→INQUIRIES

Flexible Magnet Sheet of rare earth Nd-Fe-B.
The Sheet surface does not have the oxidation and falling off of magnet material for a multilayered structure body.
In comparison with normal rubber magnet, there is about 4 times adsorption power.
This product is superior to conventional rubber magnet in flexibility, the reconstruction characteristics and can easily clip it out in scissors and cutter.

• NORMAL SHEET SIZE
0.6 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
1.0 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
2.0 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
3.0 mm thickness : 200 mm (W) x 220 mm (L) and 200 mm (W) x 440 mm (L)
• THE SHEET WITH ADHESION MATERIAL IS AVAILABLE

♦ MAGNETIC CHARACTERISTIC

	SI group (mT)	CGS group (kG)
Residual magnetic flux density (Multiple poles, 5mm pitch)	518-534	5.2-5.3
Coercive force (HcB)	332-337	4.2-4.3
Coercive force (HcJ)	>650	>8.2
Maximum energy product (BH max)	44-46	5.5-5.8

♦ SURFACE MAGNETIC FLUX DENSITY AND ADSORPTION POWER

Thickness	Dimensions	Surface magnetic force	Adsorption power
0.6 mmt	200mm-440mm	130-140mT	140g/cm²
1.0 mmt	200mm-440mm	130-140mT	360g/cm²
2.0 mmt	200mm-440mm	160-165mT	450g/cm²
3.0 mmt	200mm-440mm	130-140mT	530g/cm²

♦ PRODUCT PHYSICS CHARACTERISTIC

Thickness		1.0mmt	2.0mmt
Heat-resistant temperature range		≤100°C	≤100°C
Flexibility		Good	Good
Strength		3.8	3.8
Growth rate		3.8	3.8
Hardness		80-85	80-85
Departure from surface rust *		Good	Good
Oiliness-resistant	Rust prevention oil	Fine	Fine
	Machine cutting oil	Fine	Fine
	Spindle oil	Admittable	Admittable

• Above data is not a guarantee value.
* Moisture test (60°C x 95% x 500Hr besides an end face)