Nd-Fe-B APPLIED PRODUCT
Plate Catch | Plate Catch (Yoke Attached) | Ball Type
Plate Catch
Since a traditional Plate Catch is thick, it had some disadvantages such as it had to be fixed on the main body of a storage case. The newly developed Plate Catch is thin and flat, and can easily be fixed on the lid since a hole for counter sunk head screw is directly bored in the magnet.
[Round Type]
| Code | OD X H | M | Holiding Force | Remarks |
|---|---|---|---|---|
| NC-12R | 12 Ø X 3 | 3 | 3.0kgf | 1) |
| NC-29R | 24 Ø X 4 | 5 | 6.0kgf | Ni plated |
| NC-40R | 35 Ø X 5 | 5 | 12.0kgf | Ni plated |
[Square Type]
| Code | L X W X H | M | Holiding Force | Remarks |
|---|---|---|---|---|
| NC-20L | 20 X 10 X 3 | 3 | 2.5kgf | 1) |
| NC-35L | 34.5 X 20 X 5 | 5 | 11.0kgf | Ni plated |
| NC-50L | 50 X 10 X 3 | 3 | 5.0kgf | 1) |
• Adsorbability is based on a backing plate of 1.6t ( Measured by Imada Digital Force Gage) .
• Must be used below 80 °C.
1)Zn plated/Cr treated(RoHS-compliant)
• Must be used below 80 °C.
1)Zn plated/Cr treated(RoHS-compliant)
Plate Catch (Yoke Attached)
A plate magnet with a yoke attached makes adsorbability two or four times as strong as the one without a yoke.
[Round Type]
| Code | OD X H | M | T(yoke) | Holiding Force | Remarks |
|---|---|---|---|---|---|
| NCC-12R | 15.5 Ø X 5 | 3 | 1.6 | 4.0kgf | 1) |
| NCC-29R | 29 Ø X 6.6 | 5 | 2.1 | 24.0kgf | Ni plated |
| NCC-40R | 40 Ø X 7.6 | 5 | 2.1 | 40.0kgf | Ni plated |
[Square Type]
| Code | L X W X H | M | T(yoke) | Holiding Force | Remarks |
|---|---|---|---|---|---|
| NCC-20L | 20 X 13.5 X 5 | 3 | 1.6 | 7.5kgf | 1) |
| NCC-35L | 34.5 X 25 X 7.5 | 5 | 2.0 | 30.0kgf | Ni plated |
| NCC-50L | 50 X 13.5 X 5 | 3 | 1.5 | 20.0kgf | 1) |
• Adsorbability is based on a backing plate of 1.6t ( Measured by Imada Digital Force Gage) .
• Must be used below 80 °C.
1)Zn plated/Cr treated(RoHS-compliant)
• Must be used below 80 °C.
1)Zn plated/Cr treated(RoHS-compliant)
Ball Type
| OD | Remarks | Surface magnetic flux density | |
|---|---|---|---|
| kG | mT | ||
| 3 Ø | Gold plated | 3.2 | 320 |
| 5 Ø | Gold plated | 4.5 | 450 |
| 8 Ø | Gold plated | 5.5 | 550 |
| 10 Ø | Gold plated | 5.8 | 580 |
| 15 Ø | Gold plated | 6.5 | 650 |
| 1)3 Ø | Ni plated | 3.2 | 320 |
| 5 Ø | Ni plated | 4.5 | 450 |
| 8 Ø | Ni plated | 5.5 | 550 |
| 10 Ø | Ni plated | 5.8 | 580 |
| 15 Ø | Ni plated | 6.5 | 650 |
- 1)1.2 Ø pieced