Ferrite magnet
Cap magnet
Cap magnets are applied magnets that combine a ferrite magnet and a yoke (iron) to concentrate magnetic force in a certain direction, making it even stronger.It can be easily installed using the holes in the yoke (types without holes are also available).
Round type (R type)
Unit: mm
* Cap material is SPCC * Adsorption power is a reference value (measured with Imada digital force gauge)
surface treatment
1) Zinc plating/chromate treatment 2) Zinc plating/unichromate treatment
| Part number | OD x H x [ID] | T | Adsorption power | surface treatment | Remarks | |
|---|---|---|---|---|---|---|
| N | kgf | |||||
| 12R | 12.3φ x 3.7 | 0.5 | 3.92 | 0.4 | 2) | |
| 16R | 16φ x 3 (2.7φ) | 0.7 | 5.88 | 0.6 | 2) | |
| 18R | 17.5φ x 5 | 0.7 | 11.77 | 1.2 | 2) | |
| B18R | 17.5φ x 5 | 0.7 | 3.92 | 0.4 | 2) | Isotropic ferrite |
| 20R | 19.8φ x 4 (3.5φ) | 0.8 | 11.77 | 1.2 | 2) | |
| 23RH | 22.8φ x 5.2 (5φ) | 0.8 | 17.65 | 1.8 | 2) | |
| 24R | 23.5φ x 5 | 0.7 | 23.54 | 2.4 | 2) | |
| B24R | 23.5φ x 5 | 0.7 | 6.86 | 0.7 | 2) | Isotropic ferrite |
| 25R | 25.5φ x 5 (3.2φ) | 0.8 | 24.52 | 2.5 | 1) | |
| 28R | 28.8φ x 5.6 | 1.0 | 33.34 | 3.4 | 2) | |
| B28R | 28.8φ x 5.6 | 1.0 | 14.71 | 1.5 | 2) | Isotropic ferrite |
| 32R | 31.5φ x 4.7 (4.3φ) | 0.8 | 44.13 | 4.5 | 2) | |
| B32R | 31.5φ x 4.7 | 0.8 | 15.69 | 1.6 | 2) | Isotropic ferrite |
| 36R | 36φ x 7.3 | 1.6 | 83.36 | 8.5 | 2) | |
| 36RH | 36φ x 7.3 (4.2φ) | 1.6 | 68.65 | 7.0 | 2) | |
| 44R | 44φ x 8 (M4) | 1.6 | 117.68 | 12.0 | 2) | |
| B44R | 44φ x 8 (M4) | 1.6 | 36.28 | 3.7 | 2) | Isotropic ferrite |
| 50R | 50φ x 8.5 (5φ) | 1.6 | 147.10 | 15.0 | 2) | |
| 52R | 51.5φ x 7.9 (4.9φ) | 1.6 | 156.91 | 16.0 | 1) | |
| 66R | 66φ x 9.8 (9.5φ) | 2.0 | 245.17 | 25.0 | 1) | |
| 66RS | 66φ x 9.8 (6.2φ) | 2.0 | 245.17 | 25.0 | 1) | |
| 77R | 76.5φ x 11 (6.2φ) | 2.0 | 343.23 | 35.0 | 1) | |
| 80R | 80φ x 12.7 (10.2φ) | 2.0 | 392.27 | 40.0 | 1) | |
| 98R | 98φ x 12.5 (9.5φ) | 2.0 | 539.37 | 55.0 | 1) | |
| 125R | 124.5φ x 12.4 (12.7φ) | 2.0 | 784.53 | 80.0 | 1) | |
Round type (R type, Usu type)
| Part number | OD x H x [ID] | T | Adsorption power | surface treatment | |
|---|---|---|---|---|---|
| N | kgf | ||||
| 46RH | 46φ x 4.7 (5φ) | 1.2 | 147.10 | 15.0 | Galvanized / unichromate treatment |
Square type (L type)
60L with grooves on both sides
Unit: mm
| Part number | L × W × H | T | Adsorption power | surface treatment | Remarks | |
|---|---|---|---|---|---|---|
| N | kgf | |||||
| 20L | 20 × × 8.4 4.2 | 0.6 | 7.85 | 0.8 | 2) | |
| 24L | 24 × × 12 5.1 | 0.8 | 19.61 | 2.0 | 2) | |
| 25LH | 25.5 x 23.5 x 6.7 (6φ) | 1.6 | 44.13 | 4.5 | 2) | |
| 25L | 25.5 × × 23.5 6.5 | 1.4 | 58.84 | 6.0 | 2) | |
| 26L | 25.5 × × 11 6.5 | 1.0 | 19.61 | 2.0 | 2) | |
| 36L | 36 × × 21 6 | 1.0 | 49.03 | 5.0 | 2) | |
| 43LH | 43 x 30.2 x 7 (6φ) | 1.6 | 93.16 | 9.5 | 2) | |
| 43L | 42.8 × × 28 6.5 | 1.2 | 127.49 | 13.0 | 1) | |
| 45L | 45 × × 30 7 | 1.6 | 127.49 | 13.0 | 2) | |
| 49L | 49 × × 41 13 | 2.0 | 196.13 | 20.0 | 2) | |
| 49LH | 49 x 41 x 12.8 (M5) | 2.0 | 196.13 | 20.0 | 2) | |
| 60L | 60 × × 23.4 6.8 | 1.4 | 112.78 | 11.5 | 2) | With grooves on both sides |
| 79L | 79 × × 38 13 | 2.0 | 186.33 | 19.0 | 2) | With grooves on both sides |
* Cap material is SPCC * Adsorption power is a reference value (measured with Imada digital force gauge)
* Since the magnetic flux is concentrated on the tip S of the cap, the suction force is 5 to 10 times that of the magnet alone.
1) Galvanization / chromemate treatment 2) Galvanization / unichromate treatment
Square type (L type, with holes on both sides)
70L with holes on both sides
90L with holes on both sides
Unit: mm
| Part number | L × W × H | T | Adsorption power | surface treatment | Remarks | |
|---|---|---|---|---|---|---|
| N | kgf | |||||
| 70L | 69.9 x 29.7 x 13.2 (5φ x 2) | 2.6 | 98.07 | 10.0 | Nickel plating | With 5φ holes on both sides 1) |
| 90L | 90 x 18.8 x 6 (3.5φ x 2) | 1.2 | 88.26 | 9.0 | 2) | With 3.5φ holes on both sides |
The material of the cap is SPCC
* Adsorption power is a reference value (measured with Imada's digital force gauge)
* Since the magnetic flux is concentrated on the tip S of the cap, the suction force is 5 to 10 times that of the magnet alone.
1) Limited stock available 2) Galvanized/Unichromate treatment
Square type (L special type)
Unit: mm
28LF with double-sided tape
47LP with 2 claws on one side
| Part number | L × W × H | T | Adsorption power | surface treatment | Remarks | |
|---|---|---|---|---|---|---|
| N | kgf | |||||
| 28LF | 28.5 × × 15.5 4.5 | 1.2 | 29.42 | 3.0 | 1) | With double-sided tape |
| 43.5L | 43.5 × × 30.1 7 | 1.5 | 53.94 | 5.5 | 2) | With double-sided tape and protective film |
| 50L | 50 x 27 x 12 (5φ x 2) | 1.6 | 137.29 | 14.0 | 2) | 4 M2 countersunk holes |
| 45LP | 45 × × 30 7 | 1.6 | 73.55 | 7.5 | 2) | With double-sided tape and protective film |
| 47LP | 46.8 × × 30 7.7 | 1.8 | 53.94 | 5.5 | 2) | With protective film, with 2 claws on one side 3) |
| 51LP | 51 × × 30.4 7 | 1.5 | 88.26 | 9.0 | 2) | with protective film 3) |
* Cap material is SPCC, 50L hole pitch is 25, double-sided tape is XNUMXM Japan VHB tape specification.
* Adsorption power is a reference value (measured with Imada's digital force gauge)
1) Zinc plating/Chromemate treatment 2) Zinc plating/Unichromate treatment 3) Limited stock