Applied Products

Pot Magnet

Pot Magnet, a newly developed magnet for current industrial needs, can produce a magnetic field on its exclusive surface. There are three different types due to its temperature durability. Sm-co Pot Magnet can be used under 350 Centigrade, Alnico Pot Magnet can be used under 450 Centigrade, however the pot magnets made of ferrite should be used under 250 Centigrade. Each type reduces 10 to 50% of the magnetic force at each maximum temperature, however the same force is recovered at normal temperature.

Anisotropic Sr-Ferrite

Measure:mm

FS-50R and FS-63R are available with a handle optionally

Code D × H × d × L M Holding Force
kgf N
FS-36R 36φ × 8 × 8φ × 16 4 7.0 68.65
FS-50R 50φ × 10 × 12φ × 22 6 20.0 196.13
FS-63R 63φ × 14 × 15φ × 30 8 40.0 392.27

• Adsorbability is based on a backing plate of 1.6t
(Measured by Imada Digital Force Gage) .
• CR plated

Alnico Magnet

Measure:mm

Code D × H M Holding Force
kgf N
AF-21R 21φ × 19 M6 × 5 3.5 34.32
AF-27R 27φ × 25.4 M6 × 5 6.0 58.84
AF-35R 35φ × 30 M6 × 10 20.0 196.13

• Adsorbability is based on a backing plate of 1.6t
( Measured by Imada Digital Force Gage) .
• CR plated

Sm-Co Magnet

Measure:mm

Code D × H × d × L M Holding Force
kgf N
SS-8R 8φ × 4.5 × 6φ × 11.5 3 0.8 7.85
SS-20R 20φ × 6 × 8φ × 13 4 7.5 73.55
Code D × H Holding Force
kgf N
SF-10R 10φ × 4.5 1.6 15.69
SF-20R 20φ × 6 7.0 68.65
SF-25R 25φ × 7 9.0 88.26
Code D × H M Holding Force
kgf N
SD-15R 15φ × 15 M5 × 7 2.5 24.52
1) SD-28H 27.5X 15 M4 × 5 15.0 147.10

• Adsorbability is based on a backing plate of 1.6t
(Measured by Imada Digital Force Gage) .
• CR plated 1) Nd-Fe-B magnet